Pixel Magic Systems VPS3800 Bedienungsanleitung PDF herunterladen (Seite 75)

• Audio Output:

• You can also define any audio output port as the output of sub-picture audio. In this

case, the audio output port(s) is switched to output audio from the “audio source of sub-

picture” rather than audio from the “audio source of normal processing”

• The audio output from the sub-picture audio source has no delay

• This feature is available only in firmware version 2.00 or later

• PIP/PBP and Secondary Passthru share the video input source. Therefore, when you set

PIP/PBP to ON, it is better to turn Secondary Passthru to OFF. Otherwise the video input

source of Secondary Passthru will be taken over by PIP/PBP as the video input source of

the sub-picture

When the action button is pressed, the OSD turns to the following page:

• Use the Left/Right arrow remote control keys to adjust the sliders

• Use the Up/Down arrow remote control keys to select between different sub-picture

adjustment options

• When OK is pressed on the remote control, the whole OSD is hidden and only the slider

control is shown at the lower left corner of the display

• Pressing Back on the remote control will return you to the full OSD, or simply press the

Menu key to exit from OSD mode

• You can select a different color as the frame of the main picture and/or sub-picture. The

default is no frame

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 81 82 83

Keine Kommentare

Pixel Magic Systems VPS3800 Bedienungsanleitung Seite 75